An analysis of the Puri Brata Resort & Gallery building’s design from an environmental aesthetics and sustainability perspective

Hermawan Hermawan; Amin   Safa’at; Nabila Arrizqi  Annisa

doi:10.59400/be.v2i2.1316

An analysis of the Puri Brata Resort & Gallery building’s design from an environmental aesthetics and sustainability perspective

Hermawan Hermawan Department of Architecture, Universitas Sains Al-Qur’an, Wonosobo 56351, Indonesia
Amin Safa’at Department of Architecture, Universitas Sains Al-Qur’an, Wonosobo 56351, Indonesia
Nabila Arrizqi Annisa Department of Civil Engineering, Universitas Islam Indonesia, Yogyakarta 55584, Indonesia

Article ID: 1316

733 Views, 49 PDF Downloads

DOI: https://doi.org/10.59400/be.v2i2.1316

Keywords: sustainable architectural design; environmental aesthetics; cultural heritage; hospitality industry

Abstract

The research paper delves into the implementation of sustainable architectural design practices at Puri Brata Resort & Gallery in Yogyakarta, Indonesia. The primary objective of the study is to analyze the impact of eco-friendly design principles on both the environment and visitor experience within the resort. Data collection for this research involved conducting a comprehensive survey among visitors to the resort, focusing on aspects such as air quality, temperature control, and overall visitor comfort. Additionally, data was gathered on the utilization of green spaces within the resort and the incorporation of local cultural values and aesthetics in the architectural design. The survey responses were then analyzed to evaluate the perceived impact of sustainable design elements on the guest experience and environmental sustainability. The findings of the research indicate that the integration of eco-friendly practices at Puri Brata Resort & Gallery has positively impacted various aspects, including improved air quality, efficient temperature control, and enhanced visitor comfort. The use of recycled materials, renewable energy sources, and green spaces has contributed to creating a harmonious and sustainable environment that enhances the overall guest experience. The study underscores the importance of incorporating sustainable design principles in architectural practices to create spaces that benefit both the environment and visitors. This research provides valuable insights for industry practitioners and policymakers looking to adopt sustainable design practices in the hospitality and tourism sector.

References

[1]Don DeMarinis. Sustainability Matters to Hotel Guests, Staff and The Environment. Available online: https://www.hospitalitynet.org/opinion/4116655.html (accessed on 2 June 2024).

[2]Intergovernmental Panel on Climate Change. Climate information relevant for Tourism. Available online: https://www.ipcc.ch/report/ar6/wg1/downloads/factsheets/IPCC_AR6_WGI_Sectoral_Fact_Sheet_Tourism.pdf (accessed on 2 June 2024).

[3]WWF. WWF and Greenview Unveil Methodology to Measure Waste Across Hotel Chains. Available online: https://www.worldwildlife.org/press-releases/wwf-and-greenview-unveil-methodology-to-measure-waste-across-hotel-chains (accessed on 2 June 2024).

[4]Antonova N, Ruiz-Rosa I, Mendoza-Jimenez J. Water Resource Management in Hotels Using a Sustainable Balanced Scorecard. Sustainability. 2022; 14(13): 8171. doi: 10.3390/su14138171

[5]Sari Kalh, Sholeh, MSR. The Development of Biomorphic Architecture and its Integration with Green Architecture Principles. Semsina. 2022; 3(2): 184-190. doi: 10.36040/semsina.v3i2.5104

[6]Termal K, Penghematan DAN, Teori E. Realisation in Architectural Design. Available online: https://www.youtube.com/watch?v=jSKnD-d7Js8, 20 April 2024 (accessed on 13 March 2024).

[7]Nugroho NF, Afgani JJ. Study of Bioclimatic Architecture Concept in Resort Hotel Building (Hainan Blue Bay Westin Case Study). Purwarupa Jurnal Arsitektur. 2023; 7(1): 21. doi: 10.24853/purwarupa.7.1.21-26

[8]Nazarudin R, Anisa A. Study of the Concept of Ecological Architecture in the Alam Asri Resort Hotel Area. Rustic. 2020; 1(1): 11-21. doi: 10.32546/rustic.v1i1.885

[9]Anisa A. Study of Ecological Architecture Concept in Resort Area Case Study: Ayer Island Resort and Cottages. JAUR (Journal of Architecture and Urbanism Research). 2020; 3(2): 129-138. doi: 10.31289/jaur.v3i2.3413

[10]Schiano-Phan R, Soares Gonçalves JC. Sustainability in Architectural Education—Editorial. Sustainability. 2022; 14(17): 10640. doi: 10.3390/su141710640

[11]Schroeder T. Giving Meaning to the Concept of Sustainability in Architectural Design Practices: Setting Out the Analytical Framework of Translation. Sustainability. 2018; 10(6): 1710. doi: 10.3390/su10061710

[12]Kumar SA, Yadav M. Sustainability in Architecture: Dynamic Buildings, “The Future of India.” International Journal of Engineering Research & Technology. 2020; 1508-1511.

[13]Yin W. The Importance of architecture in shaping our built environment. International Journal of Advancements in Technology. 2023; 14: 1-2.

[14]Ismaeel WSE. The Dynamics of Sustainable Material Selection for Green-Certified Projects. Buildings. 2023; 13(8): 2077. doi: 10.3390/buildings13082077

[15]Alkasar BE, Yahya HA. A Comparative Analysis of Design Criteria Influencing Building Material Selection Across Different Architectural Contexts. International Journal of Sustainable Development and Planning. 2023; 18(10): 3117-3124. doi: 10.18280/ijsdp.181014

[16]Li S. Sustainable Material Selection in Architectural Design. Atlantis Press SARL; 2024. pp. 4-10.

[17]Daugelaite A, Grazuleviciute-Vileniske I. The Relationship between Ethics and Aesthetics in Sustainable Architecture of the Baltic Sea Region. Sustainability. 2021; 13(4): 2259. doi: 10.3390/su13042259

[18]Celadyn W, Celadyn M. Architectural Detail in Sustainable Architecture: Formal and Aesthetic Connotations. Sustainability. 2024; 16(11): 4502. doi: 10.3390/su16114502

[19]Wahba SMED. Friendly and Beautiful: Environmental Aesthetics in Twenty-First-Century Architecture. Nexus Network Journal. 2010; 12(3): 459-469. doi: 10.1007/s00004-010-0045-1

[20]Daugelaite A, Dogan HA, Grazuleviciute-Vileniske I. Characterizing sustainability aesthetics of buildings and environments: methodological frame and pilot application to the hybrid environments. Landscape Architecture and Art. 2021; 19(19): 61-72. doi: 10.22616/j.landarchart.2021.19.06

[21]Hegazy I, Seddik W, Ibrahim H. The living building: integrating the built environment with nature evaluating the Bibliotheca of Alexandria according to the challenge imperatives. International Journal of Low-Carbon Technologies. 2017; 12(3): 244-255. doi: 10.1093/ijlct/ctx003

[22]Fei T, Liu Y, Guo J. Visual Integration Relationship between Buildings and the Natural Environment Based on Eye Movement. Buildings. 2022; 12(7): 930. doi: 10.3390/buildings12070930

[23]Manalo G lyn M, Afable FM. Implementation of Green Tourism Practices in the Hotels and Resorts of White Beach Puerto Galera. American Journal of Tourism and Hospitality. 2023; 1(1): 27-34. doi: 10.54536/ajth.v1i1.1769

[24]Harindra Syam F, Wisdianti D, Sajar S. Study of Sustainable Architecture Concepts. International Journal of Research and Review. 2023; 10(4): 419-424. doi: 10.52403/ijrr.20230450

[25]Rana S. Sustainability in Business: Some Research Perspectives. FIIB Business Review. 2019; 8(2): 77-78. doi: 10.1177/2319714519854232

[26]El-Barmelgy H, Ibrahim A. Eco-efficient resort planning and design. A practical case study of Marina el-Alamien. Journal of Urban Research. 2014; 13(1): 113-130. doi: 10.21608/jur.2014.92879

[27]Pawar M, Patil A, Shelar A, et al. Analysis and design of sustainable resort. VIVA-Tech International Journal for Research and Innovatio. 2021; 1: 38-43.

[28]Mustapha M, Wahidin Awang K. Sustainability of a beach resort: A case study. International Journal of Engineering & Technology. 2018; 7(2.29): 210. doi: 10.14419/ijet.v7i2.29.13319

[29]Joseph-Ikinako. Sustainable Eco tourism: A case study of Marang resort. Global Scientific Journal. 2021; 9(4):165-79.

[30]Niza A, Setiyani A, Sekarkinasih D, et al. Influence of openings for energy efficiency in buildings and green areas Case. Study of Majapahit Eco-Resort in Mojokerto. 2020; 3(2): 507-518.

[31]Hermawan H, Fikri MA. Kinerja Thermal Performance of Timber Walled, Tile Roofed and Ground Floored Houses in the Warm Tropics. Jurnal Ilmiah Arsitektur. 2020; 10(2): 54-60. doi: 10.32699/jiars.v10i2.1619

[32]Ismulyadi CB. The Hybridity of Puri Brata Pilgrimage. Rhetoric: Journal of Humanities. 2018; 5(1): 395. doi: 10.24071/ret.v5i1.1521

[33]Fasbira Mustofa A, Yus Fauziah I. Effect of roster pattern on the effectiveness of natural lighting and visual comfort of the building (Case Study: Asy Syams Kulon Progo Mosque). Curating the Past to Build Architectural Business. 2022; 334-344.

[34]Muhsin A, Nabila A, Purnama A. Influence of Roster Design and Pattern on Simulated Natural Airing of Building Facades. J Reka Karsa. 2022; X(3): 1-7.

[35]Lestari G, Gunawan A. The influence of tree canopy shape on the aesthetic quality of streetscapes. J Lanskap Indones. 2010; 2(1): 30-35.

Published

2024-07-17

How to Cite

Hermawan, H., Safa’at, A., & Annisa, N. A. (2024). An analysis of the Puri Brata Resort & Gallery building’s design from an environmental aesthetics and sustainability perspective. Building Engineering, 2(2), 1316. https://doi.org/10.59400/be.v2i2.1316

Download Citation

Issue

Vol. 2 No. 2 (2024)

Section

Article

This work is licensed under a Creative Commons Attribution 4.0 International License.

Editor-in-Chief

Prof. Scholz Miklas
University of Johannesburg, South Africa

eISSN

3029-2670

Publication Frequency

Semi-annual

About the Publisher

Academic Publishing insists on taking academic exchange and publication as the main line, carrying out comprehensive management based on science and technology, and fully exploring excellent international publishing resources. Within 5 years, it will form a strategic framework and scale with science (S), technology (T), medicine (M), education (E), and humanities and arts (H) as the main publishing fields. Academic Publishing is headquartered in Singapore and based in Malaysia, with the United States and China providing the main scientific and academic resources. At the same time, it has established long-term good cooperative relations with other publishing companies, scientific research communities, and academic organizations in more than a dozen countries and regions. Academic Publishing uses English and Chinese as its main publishing languages, mainly publishing books, journals, and conference papers in print and online. The vast majority of publications follow the international open access policy, providing stable and long-term quality and professional publications. With the joint efforts of the expert team and our professional editorial team, our publications will gradually be indexed by international databases in stages to provide convenient and professional retrieval for various scholars. At the same time, manuscripts we accept will be subject to the peer review principle, and cutting-edge and innovative research articles will be preferentially accepted for peer reference and discussion. All kinds of our publications are welcome for peer to contribute, access, and download.

more

Volume Arrangement

2025

2024

2023

Featured Articles

Effect of natural pozzolana, pozzolanic sand, and basalt on thermal and mechanical properties of green concrete

Green concrete, also known as sustainable concrete, is a building material that aims to reduce environmental impact by using natural, recycled, or sustainable materials in its production. One way to achieve sustainability in concrete is to replace cement with pozzolanic materials, which not only reduces the carbon footprint but also improves the performance of concrete and reduces its cost. This study aims to use natural materials that can partially or completely replace cement and conventional aggregates in concrete mixes. pozzolanic gravel (GPoz) replaced coarse aggregate, basaltic sand (SBas) and pozzolanic (SPoz) replaced fine aggregate, while ground pozzolana (PN) replaced cement. This work focuses on the experimentation and simulation of concrete mixes using the four abovementioned materials. 36 cubes were cast to conduct the thermal conductivity test by direct exposure of concrete samples, where an insulated thermal chamber was designed from thermal bricks, equipped with a heat source from the bottom and an empty space for the tested sample from the top, and then the resistance test on simple pressure was conducted for the cubic samples at the age of 28 days. Pozzolanic aggregate, when used in combination with basalt sand, showed greater thermal resistance compared to conventional concrete. Even with the replacement of 50% of the cement with ground pozzolana, we notice an increase in resistance of more than 11%, but with the replacement of basalt sand with pozzolana sand, we notice an increase in thermal resistance of more than 53%. As for the mechanical properties represented by resistance on simple pressure, we notice an acceptable decrease in resistance when replacing cement with pozzolana, with the exception of mixtures containing aggregates and pozzolana sand together, where replacing 50% of the cement with pozzolana increases the resistance on simple pressure by more than 46.4%.

Fulfilling the potentials of residential solar energy in Egypt

Energy plays a very important role in Egypt’s economic development, but the country has a gap between its produced energy and the demand of its growing population. Utilization of solar power systems in Egypt could help the country to close this gap and fulfil its national and international obligations. However, since 1980, the focus in Egypt has been on large-scale industrial solar projects. Limited attention is given to smaller systems for typical residential buildings. The aim of this research, therefore, is to highlight the potential of small residential solar systems (SRSS) in Egypt. With the huge number of residential buildings accommodating more than 115 million Egyptians, SRSS could be the unearthed gem of a sustainable source of energy in Egypt. The geographical location of Egypt and climate were used to generate solar data using the Global Solar Atlas application. The amounts of monthly and annual solar irradiations were calculated and analysed to decide the best orientation of the system (facing east, west, north, and south), identify the optimum tilt angle of the system, and determine the size of the solar panels. A case study was used to illustrate the procedures of designing SRSS for a typical residential building in Egypt. The results showed that a 26 kWp SRSS oriented facing the east with an optimum tilt angle between 15° and 30° could produce an annual total output of electricity more than the annual demand of the occupants of the studied residential building. Such a system would fit easily on the roof of the building. It was concluded that the installation of SRSS in Egypt could help the country meet the demand of its ever-increasing population if properly regulated, financed, and managed. It is recommended that Egypt develop and implement policies to make installations of SRSS an attractive choice among homeowners and investors by introducing encouraging incentives and creating a competitive market with affordable SRSS.

Fighting for collusive bidding in the construction industry: A text mining-enabled approach

Policy measures are crucial for regulating collusive bidding and are integral to effective governance. However, current research lacks a comparative exploration of strategies to combat collusive bidding through policy. Therefore, this study aims to identify more effective countermeasures by examining policy variations between regions with low and high incidences of collusive bidding. Using Latent Dirichlet Allocation (LDA) topic modeling, the study extracts key themes from these policies, while qualitative analysis highlights differences in approaches. It underscores that integrating electronic and information technology into bidding systems significantly reduces collusive practices. While increasing penalties can deter collusive bidding, achieving desired impacts requires thorough investigation and vigilant oversight. Additionally, strengthening external supervision enhances control over such activities. This study identifies critical governance strategies for addressing collusive bidding and advocates further research into more effective methods within the construction sector.

Comprehensive seismic loss model of Tehran, Iran in the case of Mosha fault seismic scenario using stochastic finite-fault method

This paper presents the results of a study caried out to assess probable seismic loss, in term of damage to the residential buildings and the number of fatalities, in the case of Mosha Fault seismic scenario in Tehran, Iran. Accordingly, seismic risk components (including seismic hazard, exposure model and fragility curves) are evaluated. The stochastic finite-fault method with dynamic corner frequency is applied for quantifying ground motion values. The results shows that PGA on the soil surface could range between 0.1 g to 0.45 g. Then, a reliable model of building exposure by analyzing census data from Tehran is compiled. This model included 19 different classes of buildings and is used to evaluate the potential damage to buildings from seismic scenario. The results indicate that the median of damage ratio from 100,000 iterations for the whole of the city is about 6% ± 1.54%. The study found that the central and eastern parts of Tehran are the most vulnerable areas, with an estimated 15,952 residents at risk of losing their lives in this scenario. This is equivalent to 0.2 percent of total population of Tehran. The finding from this study can be used by local authorities to provide appropriate emergency-response and preparedness plans in the case of Mosha Fault seismic scenario.

Digital transformation of quality management in the construction industry during the execution phase by integration of building information modeling (BIM) and cloud computing

The quality of construction projects significantly impacts social and economic development. However, low quality and project failure often result from factors such as lack of quality procedures, poor communication, task coordination, and inefficient progress monitoring. This research aims to improve the efficiency of the construction phase by creating quality control checklists for processes and enhancing quality management through a collaborative digital environment integrating building information modeling (BIM) and cloud computing. Expert constructive interviews were first conducted to define a construction process quality control procedure to be linked to the 3DBIM model and then transition to a collaborative cloud environment (Autodesk Construction Cloud). An actual instance in Latakia City (Syria) demonstrated that the proposed methodology improves the efficiency and effectiveness of quality management during the implementation phase. It does so by offering a robust database, enhancing on-site quality information extraction from BIM models using smartphones, documenting defects and entering inspection data directly into a shared digital environment, and making it easier to track corrective actions and feedback. This facilitates constant and organized access to current data, reducing errors and rework, saving money and time, and enhancing decision-making speed and effectiveness. The search recommends the necessity of strict laws to adhere to quality procedures and the importance of providing infrastructure for digital transformation in quality management.

Net zero energy analysis and energy conversion of sustainable residential building in Muscat, Oman

The building sector is the predominant consumer of primary energy globally. The building sector accounts for around 40% of global energy production.Net Zero Energy Buildings (NZEBs) are highly suggested by energy experts as an effective option to alleviate the strain on primary energy sources caused by the building sector. The disparity between energy performance predictions provided during the design phase and the actual energy performance of residential buildings is mostly attributed to a limited comprehension of the components that influence energy consumption and the constraints of whole building simulation software. The objective of this research was to perform a comparison analysis of the expected and actual energy consumption of a prototype net-zero energy house built at the University of Technology and Applied Sciences in Muscat. The Hourly Analysis Programme (HAP V4.2) was utilised to forecast the energy consumption of a Net Zero Energy Building (NZEB) at HCT, taking into account the availability of an Energy Recovery Ventilator (ERV) and the absence of an ERV. The newly built house underwent a one-month testing phase to fulfil many duties according to competition regulations. One of the main goals was to generate on-site energy through photovoltaic panels, producing an amount proportional to the energy consumed by the house. Upon comparing the actual energy consumption data with the simulated result, it was noticed that the actual energy demand of the house was around 20% lower than the prediction made by the simulation tool.

Architecting sustainability performances and enablers for grid-interactive efficient buildings

Today, grid-interactive efficient buildings are gaining popularity due to their potential sustainability performances through their ability to learn, adapt, and evolve at different scales to improve the quality of life of their users while optimizing resource usage and service availability. This is realized through various practices such as management and control measures enabled by smart grid technologies, interoperability, and human-cyber-physical security. However, despite their great potential, the research of those technologies still faces various challenges. These include a lack of communication and control infrastructure to address interpretability, security, cost barriers, and difficulties balancing occupant needs with grid benefits. Initially, system modelling and simulation are promising approaches to address those challenges ahead of time. It involves the consideration of complex systems made up of components from various research domains. This paper addresses the above practices, highlighting the value of integrating technology and intelligence in the planning and operation of buildings, both new and old. It provides a way to educate architects and engineers about this emerging field and demonstrates how these practices can help in creating efficient, resilient, and secure buildings that contribute to occupant comfort and decarbonization.