Overview of Integrated Packaging Single-Cell Technology for Hydrogen Proton Exchange Membrane Fuel Cells

Ji  Pu; Qianya  Xie; Kai  Li; Zhanfeng  Wang; Chunyu Li; Jun  Li; Ziliang  Zhao

doi:10.59400/esc4141

Overview of Integrated Packaging Single-Cell Technology for Hydrogen Proton Exchange Membrane Fuel Cells

Ji Pu
Automotive Engineering College, Wuhan University of Technology, Wuhan 430070, China; Workstation of Academician Li Jun, Foshan Xianhu Laboratory, Foshan 528234, China
Qianya Xie
Workstation of Academician Li Jun, Foshan Xianhu Laboratory, Foshan 528234, China
Kai Li
Workstation of Academician Li Jun, Foshan Xianhu Laboratory, Foshan 528234, China
Zhanfeng Wang
Automotive Engineering College, Tsinghua University, Beijing 100084, China
Chunyu Li
Automotive Engineering College, Tsinghua University, Beijing 100084, China
Jun Li
Engine Development Department, General R&D Institute, Changchun 130013, China
Ziliang Zhao
Transportation College, Shandong University of Science and Technology, Qingdao 266590, China

Article ID: 4141

DOI: https://doi.org/10.59400/esc4141

Abstract

Proton exchange membrane fuel cells (PEMFCs) are gaining significant traction as a promising clean energy technology due to their high efficiency and low-temperature operation. Especially, the integrated single-cell technology is beginning to become the future trend in system applications. This paper provides a systematic review of the technological innovations and design optimizations in membrane electrodes, bipolar plates, and overall packaging for single-cell. It critically analyzes the advantages and limitations of current single-cell solutions from the perspectives of cost, performance, and durability. It provides theoretical support for the engineering application and large-scale production of PEMFC single-cell technology.They shall not contain displayed mathematical equations, numbered reference citations, nor footnotes. They should include three or four different keywords or phrases, as this will help readers to find it. It is important to avoid over-repetition of such phrases as this can result in a page being rejected by search engines. Ensure that your abstract reads well and is grammatically correct.

Published

2026-04-10

How to Cite

Pu, J., Xie, Q., Li, K., Wang, Z., Li, C., Li, J., & Zhao, Z. (2026). Overview of Integrated Packaging Single-Cell Technology for Hydrogen Proton Exchange Membrane Fuel Cells. Energy Storage and Conversion, 4(2). https://doi.org/10.59400/esc4141

Download Citation

Issue

Vol. 4 No. 2 (2026): in progress

Section

Article

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

[1]Koval V, Shmygol N, Đurović S, et al. Analysis of Innovative Electromobility Development and the Advancement of Eco-Friendly Transport Infrastructure. Sustainability. 2025; 17(3): 1010. doi: 10.3390/su17031010

[2]Sezer MD, Ada E, Kazancoglu Y. Investigating the Key Drivers in the Transition to Sustainable Hydrogen Transportation Fuel. Economics Ecology Socium. 2024; 8(3): 16–26. doi: 10.61954/2616-7107/2024.8.3-2

[3]Rezk H, Ghasemi M, Al Saadi A, et al. Experimental validation of single and multi-objective optimization of microbial fuel cell based on recent electric eel foraging algorithm. Energy. 2025; 339: 138989. doi: 10.1016/j.energy.2025.138989

[4]Rocha C, Knöri T, Ribeirinha P, et al. A review on flow field design for proton exchange membrane fuel cells: Challenges to increase the active area for MW applications. Renewable and Sustainable Energy Reviews. 2024; 192: 114198. doi: 10.1016/j.rser.2023.114198

[5]Sheng B, Zeng Q, Li Y, et al. Research progress for single component fuel cell. Acta Materiae Compositae Sinica. 2025; 42(5): 2430–2441. Available online: https://fhclxb.buaa.edu.cn/en/article/doi/10.13801/j.cnki.fhclxb.20240914.002 (in Chinese)

[6]Fan L, Tu Z, Chan SH. Recent development of hydrogen and fuel cell technologies: A review. Energy Reports. 2021; 7: 8421–8446. doi: 10.1016/j.egyr.2021.08.003

[7]Gao WT, Lei, YJ, Zhang X, et al. An overview of proton exchange membrane fuel cell. Chemical Industry Progress. Chemical Industry and Engineering Progress. 2022; 41(3): 1539–1555. (in Chinese)

[8]Mounika K, Bhattacharjee A. Design and experimental validation for performance analysis of non-isolated power converter topologies in fuel cell integrated dynamic load based local energy systems. Energy. 2025; 322: 135576. doi: 10.1016/j.energy.2025.135576

[9]Krastev VK, Baldelli M, Bartolucci L, et al. Optimal cathode design of a single high temperature PEM fuel cell: A computational study. International Journal of Hydrogen Energy. 2025; 142: 80–89. doi: 10.1016/j.ijhydene.2025.05.346

[10]Datta R. Fuel Cell Principles, Components, and Assemblies. John Wiley & Sons; 2014.

[11]Jiang JY, Zhang Y, He XW, et al. Working principle of microbial fuel cell and strategies for enhancing power generation performance. Journal of Environmental Engineering Technology. 2024; 14(2): 699–709. Available online: https://www.hjgcjsxb.org.cn/en/article/Y2024/I2/699 (in Chinese)

[12]Nair AN, Lal S, Vangala SPK. Understanding the Impact of Flow Fields on the Performance of Direct Methanol Fuel Cells: A Review on Design Trends. The Chemical Record. 2025; 25(11): e202500025. doi: 10.1002/tcr.202500025

[13]Eikerling M, Kulikovsky A. Polymer Electrolyte Fuel Cells. CRC Press; 2014. doi: 10.1201/b17429

[14]Wang WZ, Pei FL, Shi L. Research on Contact Pressure Distribution of Proton Exchange Membrane Fuel Cell Single Cell. Automotive and New Power Sources. 2024; 7(6): 68–74. (in Chinese)

[15]Wen XF, Chen ZT, Zhan ZG, et al. Vibration response analysis of proton exchange membrane fuel cell based on finite element method. Chinese Journal of Power Sources. 2022; (8): 903–906. (in Chinese)

[16]Zhou H, Liu ZE, Li YC, et al. Study on the Impact of Defective Single Cell on the Performance of Vehicular Proton Exchange Membrane Fuel Cell. Automotive Engineering. 2023; 45(10): 1876–1884. (in Chinese)

[17]Jiao K, Xuan J, Du Q, et al. Designing the next generation of proton-exchange membrane fuel cells. Nature. 2021; 595(7867): 361–369. doi: 10.1038/s41586-021-03482-7

[18]Yuan XZ, Nayoze-Coynel C, Shaigan N, et al. A review of functions, attributes, properties and measurements for the quality control of proton exchange membrane fuel cell components. Journal of Power Sources. 2021; 491: 229540. doi: 10.1016/j.jpowsour.2021.229540

[19]Shi D, Cai L, Zhang C, et al. Fabrication methods, structure design and durability analysis of advanced sealing materials in proton exchange membrane fuel cells. Chemical Engineering Journal. 2023; 454: 139995. doi: 10.1016/j.cej.2022.139995

[20]Ye D, Zhan Z. A review on the sealing structures of membrane electrode assembly of proton exchange membrane fuel cells. Journal of Power Sources. 2013; 231: 285–292. doi: 10.1016/j.jpowsour.2013.01.009

[21]Dong WY, Pan JX, Guo W. Study on Reverse Polarization of Proton Exchange Membrane Fuel Cell Stack Caused by Anode Starvation. Journal of Higher Education Chemistry. 2024; 45(2): 20230397. (in Chinese)

[22]Zhou Y, Gao X, Wang L, et al. Integrating ion-electron dual conducting single atom catalyst for Alkaline Anion Exchange Membrane Fuel Cell. Chemical Engineering Journal. 2025; 516: 164103. doi: 10.1016/j.cej.2025.164103

[23]Sun SD, Li Z, Yuan BF, et al. Design and operation characteristics study of integrated coal gasification fuel cell power generation and methanol cogeneration system. Clean Coal Technology. 2023; 29(3): 49–55. Available online: https://www.jjmjs.com.cn/article/doi/10.13226/j.issn.1006-6772.H23031101 (in Chinese)

[24]Habibnia M, Shakeri M, Nourouzi S. Determination of the effective parameters on the fuel cell efficiency, based on sealing behavior of the system. International Journal of Hydrogen Energy. 2016; 41(40): 18147–18156. doi: 10.1016/j.ijhydene.2016.06.258

[25]Zhang Q. Research on the Superelastic Constitutive Relationship of Hydrogen Fuel Cell Sealing Composite Materials and Optimization of Sealing Structure [PhD Thesis]. Beijing University of Chemical Technology; 2022. (in Chinese)

[26]Yin J, Yang F, Yang DJ, et al. Integrated Sealing Design and Simulation of Proton Exchange Membrane Fuel Cell. Automotive Technology. 2021; 11: 15–21. (in Chinese)

[27]Liao S, Qiu D, Yi P, et al. Optimization design of assembly sequence for the proton exchange membrane fuel cell stacks with dimensional errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2025; 239(13): 1869–1882. doi: 10.1177/09544054241290929

[28]Qiu D, Peng L, Yi P, et al. Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design. Renewable and Sustainable Energy Reviews. 2021; 152: 111660. doi: 10.1016/j.rser.2021.111660

[29]Yoshizumi T, Kubo H, Okumura M. Development of High-Performance FC Stack for the New MIRAI. In: Proceedings of the SAE WCX Digital Summit; 6 April 2021; Pennsylvania, PA, US. doi: 10.4271/2021-01-0740

[30]Toyota Motor Corporation. Single Cell Battery for Fuel Cell. 201710433004.2, 19 December 2017.

[31]Zhao J, Guo H, Ping S, et al. Research on Design and Optimization of Large Metal Bipolar Plate Sealing for Proton Exchange Membrane Fuel Cells. Sustainability. 2023; 15(15): 12002. doi: 10.3390/su151512002

[32]Chan AL, Yu H, Reeves KS, et al. Identifying electrochemical processes by distribution of relaxation times in proton exchange membrane electrolyzers. Journal of Power Sources. 2025; 628: 235850. doi: 10.1016/j.jpowsour.2024.235850

[33]Chen J, Goshtasbi A, Soleymani AP, et al. Effects of cycle duration and test hardware in relative humidity cycling of a polymer electrolyte membrane. Journal of Power Sources. 2020; 476: 228576. doi: 10.1016/j.jpowsour.2020.228576

[34]Mizuno S, Hayashi T, Kubo H, et al. Development of the Fuel Cell Stack for the Second-Generation Mirai. TOYOTA Technical Review. 2021; 66: 22–27. Available online: https://global.toyota/pages/global_toyota/mobility/technology/toyota-technical-review/TTR_Vol66_E.pdf

[35]Nagasawa T, Nogi A, Ikeda T, et al. Production Engineering Technology for the Fuel Cell Stack of the Second-Generation Mirai. TOYOTA Technical Review. 2021; 66: 34–39. Available online: https://global.toyota/pages/global_toyota/mobility/technology/toyota-technical-review/TTR_Vol66_E.pdf

[36]Toyota Motor Corporation. Fuel Cell and Its Manufacturing Method. 202011313036.7, 28 May 2021.

[37]Morin A, Xu F, Gebel G, et al. Influence of PEMFC gas flow configuration on performance and water distribution studied by SANS: Evidence of the effect of gravity. International Journal of Hydrogen Energy. 2011; 36(4): 3096–3109. doi: 10.1016/j.ijhydene.2010.11.070

[38]Gong C, Tu Z, Xu Y, et al. Optimization Design of Geometric Parameters for Solid Oxide Fuel Cell Single Cell Flow Field. Journal of Physics: Conference Series. 2025; 3015(1): 012020. doi: 10.1088/1742-6596/3015/1/012020

[39]Zhang Z, Liu H, Lan G, et al. Single-cell modeling, simulation and optimization of high-temperature proton exchange membrane fuel cells: current status, challenges, and perspectives. Journal of Power Sources. 2026; 664: 238943. doi: 10.1016/j.jpowsour.2025.238943

[40]Zhang S, Ren H, Fang H, et al. Design of flow field structure and three-dimensional multiphase flow simulation for bipolar plates in the proton exchange membrane fuel cell: A novel bio-inspired conjugate dual-channel serpentine flow path. Fuel. 2026; 405: 136675. doi: 10.1016/j.fuel.2025.136675

[41]Ose N, Sato K. Gas separator for fuel cells and fuel cell equipped with gas separator. US8518601B2, 27 August 2013.

[42]Zhao Y, Peng L. Formability and flow channel design for thin metallic bipolar plates in PEM fuel cells: Modeling. International Journal of Energy Research. 2019; 43(7): 2592–2604. doi: 10.1002/er.4226

[43]Zhong D, Lin R, Liu D, et al. Structure optimization of anode parallel flow field for local starvation of proton exchange membrane fuel cell. Journal of Power Sources. 2018; 403: 1–10. doi: 10.1016/j.jpowsour.2018.09.067

[44]Shanghai ZHIZHEN New Energy Equipment Co., Ltd. A New Inlet Structure for Metal Bipolar Plates of Fuel Cells. 201910900150.0, 23 September 2019.

[45]Dayan A, Azizi K, Cleemann LN, et al. Dibromoxylene-crosslinked sulfonated para-PBI membranes for use in high temperature polymer electrolyte membrane fuel cells operating with reformate gas. Electrochimica Acta. 2025; 514: 145630. doi: 10.1016/j.electacta.2024.145630

[46]Indicatti FI, Rädler M, Stammen E, et al. Optimizing adhesive rheology for stencil printing of fuel cell sealings using supervised machine learning. International Journal of Adhesion and Adhesives. 2024; 132: 103693. doi: 10.1016/j.ijadhadh.2024.103693

[47]Lafforgue C, Toudret P, Micoud F, et al. Manufacturing of carbon-supported platinum cathodes for proton exchange membrane fuel cell using the doctor blade process: Microstructure and performance. Journal of Power Sources. 2025; 627: 235851. doi: 10.1016/j.jpowsour.2024.235851

[48]Liu YC, Lin CH, Chen S, et al. Enhancing the power density and durability of polymer electrolyte membrane fuel cells based on pulsed laser deposition-prepared Pt catalyst layer by using a nanoporous CeO2 overlayer and drop-casted Nafion with optimized drying condition. International Journal of Hydrogen Energy. 2025; 98: 242–253. doi: 10.1016/j.ijhydene.2024.12.086

Editor-in-Chief

Prof. Xiaohu Yang

Xi'an Jiaotong University, China

eISSN

3029-2778

Publication Frequency

Quarterly

About the Publisher

Academic Publishing insists on taking academic exchange and publication as the main line, carrying out comprehensive management based on science and technology, and fully exploring excellent international publishing resources. Within 5 years, it will form a strategic framework and scale with science (S), technology (T), medicine (M), education (E), and humanities and arts (H) as the main publishing fields. Academic Publishing is headquartered in Singapore and based in Malaysia, with the United States and China providing the main scientific and academic resources. At the same time, it has established long-term good cooperative relations with other publishing companies, scientific research communities, and academic organizations in more than a dozen countries and regions. Academic Publishing uses English and Chinese as its main publishing languages, mainly publishing books, journals, and conference papers in print and online. The vast majority of publications follow the international open access policy, providing stable and long-term quality and professional publications. With the joint efforts of the expert team and our professional editorial team, our publications will gradually be indexed by international databases in stages to provide convenient and professional retrieval for various scholars. At the same time, manuscripts we accept will be subject to the peer review principle, and cutting-edge and innovative research articles will be preferentially accepted for peer reference and discussion. All kinds of our publications are welcome for peer to contribute, access, and download.

more

Volume Arrangement

2026

2025

2024

2023

Featured Articles

Nitrided Copper-Iron Composite Oxides Derived from Layered Double Hydroxides for Enhanced Carbon Dioxide Electroreduction to Methane and Formic Acid

The reduction of carbon dioxide to valuable chemical products is a promising solution to address carbon balance and energy issues. Herein, amorphous nitrided copper-iron oxides are prepared by gas-phase nitriding of Cu Fe-layered double hydroxide precursor s with urea as nitrogen source. Amorphous materials are more likely to generate defect vacancies during the reaction process, and these vacancies can function as active sites for catalytic reactions. Therefore, the obtained materials show high activity for CO 2 electroreduction to methane and formic acid, achieving a total Faraday efficiency of 74.7% at −0.7 V vs RHE and exhibiting a continuous 10 h durability in the H-cell. The uniformly distributed Cu + sites act as active sites by losing electrons to activate CO 2 . During the CO 2 electroreduction , CO 2 is converted to *COOH via proton-electron coupling, *COOH combines directly with a proton in solution to produce the HCOOH product, and the other part of *COOH undergoes a protonated dehydration process to form the *CHO intermediate which dehydrates again to form CH 4 . This study provides a new approach for designing CO 2 electroreduction catalysts.

AlZnO magnetron sputtered thin film for photovoltaic application

Aluminum zinc oxide (AZO) is a nontoxic and a low-cost material that finds application as a transparent conducting electrode in photovoltaic devices. In this study the (direct current) DC magnetron sputtering of AZO films is carried out at different deposition times of 5, 10, 15, 20 and 25 min’s at room temperature and it’s structural, optical, electrical and morphological properties are studied for its use as a front contact for thin film solar cell application. The structural study suggests that the preferred orientation of grains along (002) plane having hexagonal structure and the optical and the electrical studies suggest that the films show an average transmission of 70% and a resistivity of the order of 10 -4 Ωcm. On the other hand, the scanning electron microscopy (SEM) images suggest the formation of packed grains having a homogeneous surface. Moreover in order to study the optoelectronic properties of prepared samples, the electronic and optical calculations of the AZO are performed by the first-principles calculations using density functional theory (DFT).

Investigation of self-excited induction generator for supporting domestic loads and its extension to a microgrid

This study provides a technical and financial analysis for the incorporation of a microgrid structure with a wind energy conversion system for producing electricity. This study’s primary aim is to provide solutions for issues that arise when isolated induction generators are employed with microgrids. A closed-loop smart electronic load controller is used to regulate the loads in the system that are supplied by the generation. A switched variable capacitor bank is used to supply reactive power initially during a voltage dip at varying winds and loads to sustain the voltage profile. Additionally, a simple voltage control loop-based controller for the generator side converter maintains the voltage at a steady level. Using HOMER software, an economic study of the suggested wind-based microgrid structure is also presented. A laboratory experimental setup is used to support the MATLAB/Simulink study of the proposed method and its control. The findings back the feasibility of implementing the suggested plan in grid-isolated regions for supplying critical loads.

Research progress on ZnO/MoS₂/rGO ternary photocatalysts

Energy shortage and environmental pollution have become one of the important global issues, and semiconductor photocatalytic technology is considered as one of the effective means to solve these problems. As a new and efficient green material, ZnO has attracted wide attention. ZnO is widely used in the field of photocatalysis due to its non-toxicity, low cost, environmental friendliness, adjustable band gap, high electron density, and chemical stability. However, the recombination of photogenerated charge carriers in ZnO hinders its practical application and lowers the utilization efficiency of visible light. On the other hand, molybdenum disulfide/reduced graphene oxide (MoS₂ /rGO), as a binary non-precious metal co-catalyst, has a larger specific surface area, suitable band gap width, and visible light response capability compared to single-phase graphene co-catalyst. Therefore, introducing MoS₂ /rGO co-catalyst into the ZnO system can provide more active sites, reduce the probability of photogenerated charge carrier recombination, and improve the utilization efficiency of visible light. In this review, we summarize the hydrothermal synthesis methods for preparing this highly demanded nanocomposite material, including one-step and stepwise methods. Subsequently, we elaborate on the mechanism of enhancing light absorption and achieving efficient electron-hole separation behavior in the ternary system heterojunction structure during the photocatalytic process. Due to its significant advantages, this ternary system heterojunction structure has been widely applied in the field of photocatalysis, including applications such as pollutant degradation, sterilization, and water splitting.

Wind power forecasting technologies: A review

This study addresses the critical role of wind power forecasting in ensuring stable and reliable power system operations. Wind Power Forecasting is critical for the efficient operation of plant, time scheduling, and it’s balancing of power generation with grid integration systems. Due to its dependency on dynamic climatic conditions and associated factors, accurate wind power forecasting is challenging. The research delves into various aspects, including input data, input selection techniques, data pre-processing, and forecasting methods, with the aim of motivating researchers to design highly efficient online/offline models on weather-based data. The overarching goal is to enhance the reliability and stability of power systems while optimizing energy resource utilization. The analysis reveals that hybrid models offer more accurate results, highlighting their significance in the current era. This study investigates different Wind Power Forecasting (WPF) models from existing literature, focusing on input variables, time horizons, climatic conditions, pre-processing techniques, and sample sizes that affect model accuracy. It covers statistical models like ARMA and ARIMA, along with AI techniques including Deep Learning (DL), Machine Learning (ML), and neural networks, to estimate wind power.

fmos