Effect of fillet radius on nonlinear damping identification in spur gear systems: application of Sparse Identification of Nonlinear Dynamics (SINDy)

  • Nourhaine Yousfi

    Mechanics, Modelling and Production Research Laboratory (LA2MP), Engineering National School of Sfax, University of Sfax, Tunisia

  • Rania Maktouf

    Mechanics, Modelling and Production Research Laboratory (LA2MP), Engineering National School of Sfax, University of Sfax, Tunisia

  • Ali Akrout

    Mechanics, Modelling and Production Research Laboratory (LA2MP), Engineering National School of Sfax, University of Sfax, Tunisia

  • Lassaad Walha

    Mechanics, Modelling and Production Research Laboratory (LA2MP), Engineering National School of Sfax, University of Sfax, Tunisia

  • Mohamed Haddar

    Mechanics, Modelling and Production Research Laboratory (LA2MP), Engineering National School of Sfax, University of Sfax, Tunisia

Article ID: 4383
Keywords: damping identification approach; gears systems; SINDy; fillet radius; time-varying stiffness

Abstract

Sparse Identification Approach of nonlinear dynamics (SINDy) is gaining significant interest due to their ability to identify nonlinear damping with only input data. However, its application to nonlinear mechanical systems with time-varying stiffness has not been widely explored. Here, we prove the SINDY method to include time varying stiffness conditions. In numerical models used for the development and validation of such method, fillet radius is often neglected. The present article addresses this knowledge gap by investigating the effects of fillet radius on the efficacy of SINDy, with modified library to include time varying stiffness effect, in identifying the nonlinear damping model in spur gears systems. A numerical modeling and parametric approach, is adopted to evaluate the effect of the fillet radius (Rf) on the nonlinear identification process. Three distinct modeling scenarios are considered where the fillet radius directly affects the time-varying mesh stiffness, the fillet radius influences the nonlinear contact law, and the effect of fillet radius is modeled as a geometric offset in the contact deformation. This multi-scenario framework allows a comprehensive assessment of how geometric variations influence both the system dynamics and the identified nonlinear parameters within the SINDY framework. The impacts of considering fillet radius on the nonlinear damping coefficients identification process are investigated. This work is the first to explicitly investigate the impact of fillet radius on nonlinear damping identification using an extended SINDy framework with time-varying stiffness. The results prove that SINDy approach is directly influenced by geometric modifications.

Published
2026-11-18
How to Cite
Yousfi, N., Maktouf, R., Akrout, A., Walha, L., & Haddar, M. (2026). Effect of fillet radius on nonlinear damping identification in spur gear systems: application of Sparse Identification of Nonlinear Dynamics (SINDy). Sound & Vibration, 60(6). https://doi.org/10.59400/sv4383

References

[1]P. Balasubramanian, G. Ferrari, M. Amabili, Identification of the viscoelastic response and nonlinear damping of a rubber plate in nonlinear vibration regime, Mech. Syst. Signal Process. 111, 376–398, 2018. doi: 10.1016/j.ymssp.2018.03.061.

[2]Zhang, L., Qu, D., Jiang, H. et al. Dynamic analysis of gear systems with dynamic mesh stiffness and time-varying bearing stiffness. Nonlinear Dyn 113, 28883–28906 (2025). doi: 10.1007/s11071-025-11653-8.

[3]Safari, S.; Londoño Monsalve, J.M. Data-driven structural identification of nonlinear assemblies: Asymmetric stiffness and damping nonlinearities. Mechanical Systems and Signal Processing, 222, 111745, 2025. doi: 10.1016/j.ymssp.2024.111745.

[4]Safari, S.; Londoño Monsalve, J.M. Data-driven structural identification of nonlinear assemblies: Uncertainty Quantification. International Journal of Non-Linear Mechanics, 170, 105002, 2025. doi: 10.1016/j.ijnonlinmec.2024.105002.

[5]Al-hababi, T., Cao, M., Saleh, B., Alkayem, N. F., & Xu, H. (2020). Critical review of nonlinear damping identification in structural dynamics: Methods, applications, and challenges. Sensors, 20(24), 7303. doi: 10.3390/s20247303.

[6]Nourhaine Yousfi, Fatma Mejdoub, Ali Akrout, Lassaad Walha, Mohamed Haddar, Nonlinear damping identification using extended continuous wavelet transform and long-short term memory: Application to a spur gear pair system. S V, Sound and Vibration, 2026, 60(2), 3869. doi: 10.59400/sv3869.

[7]Fehr, J., Kargl, A., Eschmann, H.: Identification of friction models for mpc-based control of a powercube serial robot. preprint arXiv:2203.10896 (2022). doi: 10.48550/arXiv.2203.10896.

[8]S. L. Brunton, J. L. Proctor, and J. N. Kutz, Discovering governing equations from data by sparse identification of nonlinear dynamical systems, Proceedings of the National Academy of Sciences, vol. 113, pp. 3932–3937, 2016. doi: 10.1073/pnas.1517384113.

[9]Didonna, M., Stender, M., Papangelo, A., Fontanela, F., Ciavarella, M., Hoffmann, N.: Reconstruction of governing equations from vibration measurements for geometrically nonlinear systems. Lubricants 7(8), 64 (2019). doi: 10.3390/lubricants7080064.

[10]K. Kaheman, J. N. Kutz, and S. L. Brunton, SINDy-PI: a robust algorithm for parallel implicit sparse identification of nonlinear dynamics, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 476, p. 20200279, 2020. doi: 10.1098/rspa.2020.0279.

[11]E. Kaiser, J. N. Kutz, and S. L. Brunton, “Sparse identification of nonlinear dynamics for model predictive control in the low-data limit,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 474, p. 20180335, 2018.

[12]R. Cao, Y. Lu, and Z. He, System identification method based on interpretable machine learning for unknown aircraft dynamics, Aerospace Science and Technology, vol. 126, p. 107593, 2022. doi: 10.1016/j.ast.2022.107593.

[13]A. Yonezawa, H. Yonezawa, S. Yahagi, I. Kajiwara, S. Kijimoto, H. Taniuchi, and K. Murakami, “Sparse identification of nonlinear dynamics with library optimization mechanism: Recursive long-term prediction perspective,” IEEE Trans. Cybern., 2026, pp. 1–14. doi: 10.1109/TCYB.2026.3652850.

[14]F. Abdullah and P. D. Christofides, Data-based modeling and control of nonlinear process systems using sparse identification: An overview of recent results, Computers & Chemical Engineering, vol. 174, p. 108247, 2023. doi: 10.1016/j.compchemeng.2023.108247.

[15]Lathourakis, C., Cicirello, A. Physics enhanced sparse identification of dynamical systems with discontinuous nonlinearities. Nonlinear Dyn 112, 11237–11264 (2024). doi: 10.1007/s11071-024-09652-2.

[16]Zhang L, Schaeffer H. 2019 On the convergence of the SINDy algorithm. Multiscale Model. Simul. 17, 948–972. doi: 10.1137/18M1189828.

[17]M. Dam, M. Brøns, J. J. Rasmussen, V. Naulin, and J. S. Hesthaven, Sparse identification of a predator-prey system from simulation data of a convection model, Physics of Plasmas, 24 (2017), 022310.

[18]F. Kiarasi, A. Asadi, M. Babaei, K. Asemi, M. Hosseini, Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading, J. Comput. Appl. Mech., 53(1), 1–23, 2022. doi: 10.22059/JCAMECH.2022.339008.693.

[19]Hesam Nazari, Masoud Babaei, Faraz Kiarasi, Kamran Asemi, Geometrically nonlinear dynamic analysis of functionally graded material plate excited by a moving load applying first-order shear deformation theory via generalized differential quadrature method, SN Applied Sciences (2021) 3:847. doi: 10.1007/s42452-021-04825-9.

[20]Adam Purnomo & Mitsuhiro Hayashibe, Sparse identification of Lagrangian for nonlinear dynamical systems via proximal gradient method, Scientific Reports (2023) 13:7919. doi: 10.1038/s41598-023-34931-0.

[21]Loiseau, J. C. & Brunton, S. L. Constrained sparse Galerkin regression. J. Fluid Mech. 838, 42–67 (2018). doi: 10.48550/arXiv.1611.03271.

[22]Yahagi, S., Seto, H., Yonezawa, A. et al. Sparse Identification and Nonlinear Model Predictive Control for Diesel Engine Air Path System. Int. J. Control Autom. Syst. 23, 620–629 (2025). doi: 10.1007/s12555-024-0452-9.

[23]K. Champion, P. Zheng, A. Y. Aravkin, S. L. Brunton, and J. N. Kutz, A Unified Sparse Optimization Framework to Learn Parsimonious Physics-Informed Models From Data, IEEE Access, vol. 8, pp. 169259–169271, 2020. doi: 10.48550/arXiv.1906.10612.

[24]N. M. Mangan, S. L. Brunton, J. L. Proctor, and J. N. Kutz, Inferring Biological Networks by Sparse Identification of Nonlinear Dynamics, IEEE Trans. Mol. Biol. Multi-Scale Commun., vol. 2, no. 1, pp. 52–63, Jun. 2016. doi: 10.48550/arXiv.1605.08368.

[25]Champion, K., Lusch, B., Kutz, J.N., Brunton, S.L., Data-driven discovery of coordinates and governing equations, Proc. Natl. Acad. Sci., 116(45), 22445–22451, 2019. doi: 10.1073/pnas.1906995116.

[26]Abderrahim Baccar, Ahmed Samet, Ahmed Hammami, Nuno Dourado, Ali Akrout, Mohamed Haddar, Impact of Fillet Radius on Mesh Stiffness and Performance of Polyoxymethylene (POM) Spur Gears: A Parametric Numerical Study, 2026, Eng. Res. Express, in press. doi: 10.1088/2631-8695/ae59f3.

[27]A. W. Hussein and M. Q. Abdullah, ‘A Novel Fillet Form for Non-Generation Cutting Gear Teeth’, Results in Engineering, vol. 16, p. 100523, Dec. 2022. doi: 10.1016/j.rineng.2022.100523.

[28]S. Senthilvelan and R. Gnanamoorthy, ‘Effect of gear tooth fillet radius on the performance of injection molded Nylon 6/6 gears’, Materials & Design, vol. 27, no. 8, pp. 632–639, Jan. 2006. doi: 10.1016/j.matdes.2004.12.015.

[29]Zhou, D.; Guo, Y.; Yang, J.; Zhang, Y. Study on the Parameter Influences of Gear Tooth Profile Modification and Transmission Error Analysis. Machines 2024, 12, 316. doi: 10.3390/machines12050316.

[30]Hardial Singh S.B. Gupta. Effect of Fillet Radius on Bending Stress in Helical Gear using FEA, Journal of Polymer & Composites, Volume 11, Special Issue 8, 2023. http://engineeringjournals.stmjournals.in/index.php/JoPC/index.

[31]S. Liu and F. Liu, “Vibration characteristics of spur gear system with non-linear damping under no lubrication condition,” Journal of Vibroengineering, Vol. 21, No. 5, pp. 1260–1270, Aug. 2019. doi: 10.21595/jve.2019.20248.