Turbine vibration condition monitoring in region 3

Seyed Ali Mousavi; Mohammad Taghipour

doi:10.59400/mea.v1i1.219

Turbine vibration condition monitoring in region 3

Seyed Ali Mousavi ABA Institute of Higher Education
Mohammad Taghipour Sohrvardi Institute of Higher Education

Article ID: 219

5944 Views, 5793 PDF Downloads

DOI: https://doi.org/10.59400/mea.v1i1.219

Keywords: vibration monitoring, gas turbine, maintenance and repair, condition monitoring

Abstract

The present study aims to investigate the vibration monitoring status in region three of gas transmission operations in Iran. Vibration monitoring is a strong tool for troubleshooting and protecting equipment (turbines). For this purpose, the vibration condition monitoring systems in a gas compression station have been studied. The number and location of vibration sensors, vibration signal transmission to the control room, alarm and stop command, and the ability to perform advanced vibration analysis for troubleshooting and data storage are taken into consideration. The favorable situation of vibration monitoring is provided for the purpose of comparison and conclusions about the status of vibration monitoring and needs have been made.

References

[1]Taghipour M, Seraj F, Hassani MA, Farahani Kheirabad S. Risk analysis in the management of urban construction projects from the perspective of the employer and the contractor. International Journal of Organization Leadership 2015; 4(4): 356–373. doi: 10.33844/ijol.2015.60284

[2]Mahboobi M, Taghipour M, Ali Azadeh M. Assessing ergonomic risk factors using combined data envelopment analysis and conventional methods for an auto parts manufacturer. Work 2020; 67(1): 113–128. doi: 10.3233/WOR-203257

[3]Taghipour M, Mahboobi M, Gharagozlou H. The impact of ICT on knowledge sharing obstacles in knowledge management process (including case-study). Iranian Journal of Information Processing and Management 2016; 31(4): 1049–1074. doi: 10.35050/JIPM010.2016.003

[4]Khalilpour M, Kamyabi Y, Nabavi Chshmi SA, Taghipour M. The impact of accountant’s ethical approaches on the disclosure quality of corporate social responsibility information an Islamic perspective in Iran. National Academy of Managerial Staff of Culture and Arts Herald 2018; 1: 1173–1181. doi: 10.32461/2226-3209.1.2018.178689

[5]Mirzaie F, Nazari AA, Zargham BH, Taghipour M. The relationship between social bearing capacities with conflict as a result, in the perception of the visiting historical sites. Journal of Investment and Management 2015; 4(6): 403–408.

[6]Alamdar Khoolaki M, Naami A, Taghipour M. Effect of integrated marketing communication on brand value with the role of agencys reputation (including case study). Journal of Process Engineering 2019; 5(11): 30–44.

[7]Taghipour M, Safari M, Bagheri H. A survey of BPL technology and feasibility of its application in Iran (Gilan Province). Science Journal of Circuites, Systems and Signal Processing 2015; 4(5): 30–40. doi: 10.11648/j.cssp.20150405.11

[8]Seddigh Marvasti SMA, Beheshti B, Chegini H, Taghipour M. Assessing the effect of FRP system on compressive and shear bending strength of concrete elements. International Journal of Innovative Research in Science, Engineering and Technology 2015; 4(11): 11511–11524. doi: 10.15680/IJIRSET.2015.0411119

[9]Jalili L, Ghafourian M, Toopal T, Taghipour M. Comparative study of Khaje Rashid al-Din views on Rab-e Rashidi Islamic Utopia and Kevin Lynch ideas. International Journal of Archaeology 2015; 3(5): 39–47. doi: 10.11648/j.ija.20150305.11

[10]Taghipour M, Vosough A, Azizi D, Abdi J. Insurance performance evaluation using BSC-AHP combined technique. National Academy of Managerial Staff of Culture and Arts Herald 2018; 1: 1158–1166. doi: 10.32461/2226-3209.1.2018.178687

[11]Rezvani BA, Ghobadian V, Taghipour D. The design of high-rise building with ecological approach in Iran (Alborz Province). International Journal of Modern Trends in Engineering and Research 2015; 2(10): 455–464.

[12]Taghipour D, Ganji F, Zolfagharijoo A, et al. The identification and prioritization of effective indices on optimal implementation of customer relationship management using TOPSIS, AHP methods (case study: Pasargad bank). Management 2020; 3(4): 43–60. doi: 10.31058/j.mana.2020.34004

[13]Taghipour M, Yazdi H. Seismic analysis (non-linear static analysis (pushover) and nonlinear dynamic) on cable-stayed bridge. American Journal of Civil Engineering 2015; 3(5): 129–139. doi: 10.11648/j.ajce.20150305.11

[14]Taghipour M, Barzegar P, Mahboobi M, Mohammadi S. Investigating the relationship between competitive strategies and corporates performance—Case study: Parsian Banks of Tehran. Management 2020; 3(4): 13–28. doi: 10.31058/j.mana.2020.34002

[15]Taghipour M, Moosavi SA. A look at gas turbine vibration condition monitoring in region 3 of gas transmission operation. Journal of Environmental Science, Computer Science and Engineering & Technology 2020; 9(3): 423–432. doi: 10.24214/jecet.C.9.3.42332

[16]Rahamni M, Vaziri Shams S, Abedi V, Taghipour M. Providing health, safety and environmental management (HSE) program in metal mining industry (including case study). Management 2021; 4(3): 14–35. doi: 10.31058/j.mana.2021.43002

[17]Taghipour M, Vaezi M. Safe power outlet. Electrical Science & Engineering 2020; 2(2): 5–10. doi: 10.30564/ese.v2i2.2464

[18]Azarian R, Taghipour M. The impact of implementing inclusive quality management on organizational trust (case study: Education). Journal of Multidisciplinary Engineering Science Studies 2020; 6(7): 3376–3383.

[19]Mohammadi S, Taghipour M, Mahboobi M. Investigating the role and impact of using ICT tools on evaluating the performance of service organizations. Iranian Journal of Information Processing and Management 2021; 37(1): 1–26. doi: 10.52547/JIPM.37.1.1

[20]Abdi J, Safarian S, Usefi R, Taghipour M. Predicting entrepreneurial marketing through strategic planning (including case study). Educational Administration Research Quarterly 2019; 10(39): 127–146.

[21]Khorasani Z, Taghipour M. The location of industrial complex using combined model of fuzzy multiple criteria decision making (including case study). International Journal of Innovation Scientific Research and Review 2020; 2(7): 268–280.

[22]Taghipour M, Sharifzadeh S, Seraj F. Risk assessment and analysis of the state DAM construction projects using FMEA technique. Trends in Life Sciences an International Peer-Reviewed Journal 2015; 4(2).

[23]Hoseinpour Z, Taghipour M, Beigi JH, Mahboobi M. The problem solving of bi-objective hybrid production with the possibility of production outsourcing through imperialist algorithm, NSGA-II, GAPSO hybrid algorithms. Turkish Journal of Computer and Mathematics Education 2021; 12(13): 8090–8111.

[24]Taghipour M, Sarchoghaei JA. Evalation of tourist attractions in Bourujerd County with emphasis on development of new markets by using Topsis model. Science Journal of Business and Management 2015; 3(5): 175–189. doi: 10.11648/j.sjbm.20150305.16

[25]Safdarpour S, Pourkhosravani P, Taghipour M. The effect of government support on innovation ability (including a case study). Journal of Multidisciplinary Engineering Science and Research 2023; 2(6): 233–237.

[26]Ganjali R, Negaresh Z, Taghipour M. Strategic analysis of household hazardous waste reduction. International Journal of Educational Foundations and Management 2023; 11(4): 1–10.

[27]Taghipour M, Safdarpour S, Taherian P, et al. The impact of managerial factors on increasing the productivity of low-level employees (including case study). Management 2022; 5(2): 16–21. doi: 10.31058/j.mana.2022.52001

[28]Ganjali R, Ohadi Digesaraei D, Taghipour M. Investigating the relationship between environmental awareness and the level of education and occupation of people. International Journal of Educational Foundations and Management 2023; 11(4): 11–15.

[29]Baghipour Sarami F, Bozorgiamiri A, Mououdi MA, Taghipour M. Modeling of nurses’ shift work schedules according to ergonomics: A case study in Imam Sajjad (AS) Hospital of Ramsar. Iranian Journal of Ergonomics 2016; 4(1): 1–12. doi: 10.20286/joe-04011

[30]Taghipour M, Habibi MH, Amin M. The impact of working capital management on the performance of firms listed in Tehran Stock Exchange (TSE). Journal of Multidisciplinary Engineering Science and Technology 2018; 7(6): 12146–12154.

[31]Molavi A, Taghipour M. A survey on electrical cars advantages. Progress in Energy & Fuels 2023; 12(1): 1–14. doi: 10.18282/pef.v12i1.3351

[32]Safdarpour S, Pourkhosravani P, Rooholamini V, Taghipour M. The effect of communication on learning ability (including a case study). Management 2022; 5(4): 46–54. doi: 10.31058/j.mana.2022.54006

[33]Akbarnezhadbaei K, Mohammadi M, Kouloubandi A, Taghipour M. Modeling the application of knowledge management system in order to improve the technology governance in the automotive industry of Iran using the data mining environment. Journal of Educational Administration Research Quarterly 2023; 14(55).

[34]Molavi A, Taghipour M. An overview of electric vehicle concepts and its features. International Journal of Educational Foundations and Management 2022; 11(4).

Published

2023-10-18

How to Cite

Mousavi, S. A., & Taghipour, M. (2023). Turbine vibration condition monitoring in region 3. Mechanical Engineering Advances, 1(1). https://doi.org/10.59400/mea.v1i1.219

Download Citation

Issue

Vol. 1 No. 1 (2023)

Section

Article

This work is licensed under a Creative Commons Attribution 4.0 International License.

In the paper, the MATLAB-Simulink model of simulation of operation of the fast light innovative regional train from “Serbian Railways” in traction and braking mode is exposed where changes are observed: stator currents of three-phase traction motors, traction electric motor speeds and electric multiple units, electromagnetic torque on the rotor shaft of the traction electric motor, and direct current bus voltage. The model allowed review of the listed parameters for: different allowed values of contact network voltage and total voltage distortion at the place of connection of the electric multiple unit to the contact network; different mechanical loads of the electric multiple unit and traction electric motor; and different train speeds and rotations of traction electric motors. Appropriate conclusions were made through the analysis of the simulation results obtained.

This paper defines vehicles and buildings as main sources of United Kingdom (UK) carbon dioxide (CO₂) and seeks to cut such emissions using green hydrogen made from combined wind and solar energy. Combustion vehicles powered by fossil petroleum emit near half of UK climate-warming CO₂ while buildings heated by natural gas provide a third. First, current UK grid problems are defined: Electricity, gas and petroleum grids. Refueling green vehicles has been a particular problem. Then experiments on the private wire community of Keele University show how green hydrogen could integrate both green vehicles and buildings. Next, the model supply chain is planned and tested. Finally, experiments and calculations are outlined, analyzing the optimum system design criteria proposed. We conclude that economic green hydrogen can displace petroleum in vehicles, while powering buildings instead of natural gas. Also, the prospect in 2024 is that profits can be made all along the green hydrogen supply chain, such that new businesses involved in local private clean communities can cost less than the National Grid monopoly and other dominant fossil energy companies.

Presently, dynamic impacts occurrences caused by car crashes have been frequently reported. Statistical results from different articles indicate that vehicle crashworthiness of bridge pier supersedes the other events. However, majority of the published articles focusses on sustainability and finding severity of distressed pier due to impact correlating faster construction methods, like accelerated bridge construction (ABC). This article is an attempt to examine post impacted behavior of a commonly used connector in ABC for resisting short duration shock. Static and dynamic performance analyses of a connector embedded within a coupler system has been examined. A representative ABC pier with the standardized and selected material properties collected from manufacturer’s data has been utilized. Coupler composite materials consisting of a hollow uniform cross-section cast iron cylinder filled up with specified concrete grout conforms higher strength. The performance examination has been conducted by numerical modeling using finite element method (FEM). A commercially used software ANSYS has been utilized for carrying out the simulations. To investigate the post impact dynamic behavior, mesh-independent studies seems inevitable and hence are executed to evaluate dynamic impact factor (DIF). Sensitivity studies are carried out for validating results in precision. The DIF of the main reinforcing tensile steel embedded into the grout placed inside the connector has been determined. Results captured from simulations to identify material properties at plastic stage in sustaining such load have been conducted. The results provide significant information that aids opting for selecting suitable connectors for attaining help the design offices.