Process analytical technology (PAT) and real-time control in chemical manufacturing

  • Yan Yan orcid

    Haixi State Economic Development Research Center, Delingha 817099, China
Article ID: 3800
DOI: https://doi.org/10.59400/adecp3800
Keywords: process analytical technology (PAT); real-time control; process optimization; model predictive control (MPC); state estimation; hybrid modelling; digital twins; chemical manufacturing

Abstract

Process analytical technology (PAT) has expanded the ability to obtain timely information about manufacturing processes and product-related attributes. However, much of the existing literature focuses on analytical technologies, monitoring applications, or sector-specific implementation, while the connection between PAT measurements, dynamic process models, state estimation, and closed-loop control has received less integrated treatment. This review addresses this gap by examining PAT-enabled real-time manufacturing from a control-oriented perspective across pharmaceutical, chemical, polymer, food, and bioprocess applications. Analytical technologies and their limitations are evaluated together with feedback, feedforward, model predictive control (MPC), nonlinear model predictive control (NMPC), state-estimation methods, and hybrid modelling approaches. A representative dynamic process and MPC framework are also considered to show how measurements, process states, manipulated variables, disturbances, constraints, and quality objectives can be linked within a control system. The reviewed evidence indicates that PAT should not be treated as a control strategy by itself. Its value depends on the reliability of analytical measurements and their integration with suitable models, estimators, and validated control approaches. Implementation maturity varies considerably among industries, with stronger evidence available in pharmaceutical continuous manufacturing and selected crystallisation and process-control applications. Important limitations include calibration transfer, sensor drift, sampling representativeness, plant-model mismatch, model maintenance, validation, and data integration. Emerging AI and digital-twin approaches may extend prediction, estimation, and decision support, but their industrial use remains dependent on reliable data, validated models, and appropriate lifecycle management.

Published
2026-09-24
How to Cite
Yan, Y. (2026). Process analytical technology (PAT) and real-time control in chemical manufacturing. Advances in Differential Equations and Control Processes, 33(3). https://doi.org/10.59400/adecp3800
Issue
Vol. 33 No. 3 (2026): In Progress
Section
Articles

Copyright (c) 2026 Yan Yan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

[1]Chen Z, Lovett D, Morris J. Process analytical technologies and real time process control a review of some spectroscopic issues and challenges. Journal of Process Control. 2011; 21(10): 1467–1482.

[2]Sacher S, Poms J, Rehrl J, et al. PAT implementation for advanced process control in solid dosage manufacturing—A practical guide. International Journal of Pharmaceutics. 2022; 613: 121408.

[3]Munson J, Freeman Stanfield C, Gujral B. A Review of Process Analytical Technology (PAT) in the USA Pharmaceutical Industry. Current Pharmaceutical Analysis. 2006; 2(4): 405–414.

[4]Laske S, Paudel A, Scheibelhofer O, et al. A review of PAT strategies in secondary solid oral dosage manufacturing of small molecules. Journal of Pharmaceutical Sciences. 2017; 106(3): 667–712.

[5]Dickens JE. Overview of Process Analysis and PAT. In: Bakeev KA (editor). Process Analytical Technology: Spectroscopic Tools and Implementation Strategies for the Chemical and Pharmaceutical Industries. John Wiley & Sons, Ltd.; 2010.

[6]Chanda A, Daly AM, Foley DA, et al. Industry perspectives on process analytical technology: Tools and applications in API development. Organic Process Research & Development. 2015; 19(1): 63–83.

[7]Wasalathanthri DP, Rehmann MS, Song Y, et al. Technology outlook for real-time quality attribute and process parameter monitoring in biopharmaceutical development—A review. Biotechnology and Bioengineering. 2020; 117(10): 3182–3198.

[8]Kim EJ, Kim JH, Kim MS, et al. Process Analytical Technology Tools for Monitoring Pharmaceutical Unit Operations: A Control Strategy for Continuous Process Verification. Pharmaceutics. 2021; 13: 919. doi: 10.3390/ pharmaceutics13060919

[9]Jelsch M, Roggo Y, Kleinebudde P, et al. Model predictive control in pharmaceutical continuous manufacturing: A review from a user’s perspective. European Journal of Pharmaceutics and Biopharmaceutics. 2021; 159: 137–142.

[10]Mesbah A, Paulson JA, Lakerveld R, et al. Model Predictive Control of an Integrated Continuous Pharmaceutical Manufacturing Pilot Plant. Organic Process Research & Development. 2017; 21(6): 844–854.

[11]Huang YS, Lagare RB, Bailey P, et al. Hybrid model development and nonlinear model predictive control implementation for continuous dry granulation process. Computers & Chemical Engineering. 2024; 183: 108586.

[12]Sansana J, Joswiak MN, Castillo I, et al. Recent trends on hybrid modeling for Industry 4.0. Computers & Chemical Engineering. 2021; 151: 107365.

[13]Gonzaga JCB, Meleiro LAC, Kiang C, et al. ANN-based soft-sensor for real-time process monitoring and control of an industrial polymerization process. Computers & Chemical Engineering. 2009; 33(1): 43–49.

[14]Cervera AE, Petersen N, Lantz AE, et al. Application of near-infrared spectroscopy for monitoring and control of cell culture and fermentation. Biotechnology Progress. 2009; 25(6): 1561–1581.

[15]Faggian A, Facco P, Doplicher F, et al. Multivariate statistical real-time monitoring of an industrial fed-batch process for the production of specialty chemicals. Chemical Engineering Research and Design. 2009; 87(3): 325–334.

[16]Yenduri G, Costa AP, Xu X, et al. Impact of critical process parameters and critical material attributes on the critical quality attributes of liposomal formulations prepared using continuous processing. International Journal of Pharmaceutics. 2022; 619: 121700.

[17]Igne B, Ciurczak EW. Near-Infrared Spectroscopy in the Pharmaceutical Industry. In: Ozaki Y, Huck C, Tsuchikawa S, et al. (editors). Near-Infrared Spectroscopy: Theory, Spectral Analysis, Instrumentation, and Applications. Springer; 2020. pp. 391–412.

[18]Bakeev AK (editor). Process Analytical Technology: Spectroscopic Tools and Implementation Strategies for the Chemical and Pharmaceutical Industries. John Wiley & Sons, Ltd.; 2010. pp. 1–15.

[19]He QP, Wang J. Statistical process monitoring as a big data analytics tool for smart manufacturing. Journal of Process Control. 2018; 67: 35–43.

[20]Seenivasan R, Pachiyappan JK, Vivek Reddy M, et al. A systematic review: Exploration of process analytical technology techniques (PAT) and their multifaceted advantages in industrial processes. International Journal of Applied Pharmaceutics. 2024; 16(2): 44–51.

[21]Nagy B, Farkas A, Borbás E, et al. Raman spectroscopy for process analytical technologies of pharmaceutical secondary manufacturing. AAPS PharmSciTech. 2018; 20(1): 1.

[22]Galata DL, Domokos A, Démuth B, et al. In-line indirect concentration measurement of ultralow dose API during twin-screw wet granulation based on NIR and Raman spectroscopy. International Journal of Pharmaceutics. 2024; 664: 124650.

[23]Rosas JG, Blanco M, González JM, et al. Real-time determination of critical quality attributes using near-infrared spectroscopy: A contribution for process analytical technology (PAT). Talanta. 2012; 97: 163–170.

[24]Miyano T, Nakagawa H, Watanabe T, et al. Operationalizing Maintenance of Calibration Models Based on Near-Infrared Spectroscopy by Knowledge Integration. Journal of Pharmaceutical Innovation. 2015; 10(4): 287–301.

[25]Steinbach D, Anderson CA, McGeorge G, et al. Calibration Transfer of a Quantitative Transmission Raman PLS Model: Direct Transfer vs. Global Modeling. Journal of Pharmaceutical Innovation. 2017; 12(4): 347–356.

[26]Siddique I. Unveiling the power of high-performance liquid chromatography: Techniques, applications, and innovations. European Journal of Advances in Engineering and Technology. 2021; 8(9): 79–84.

[27]Reemtsma T. Determination of molecular formulas of natural organic matter molecules by (ultra-) high-resolution mass spectrometry: Status and needs. Journal of Chromatography A. 2009; 1216(18): 3687–3701.

[28]Allakhverdiev ES, Khabatova VV, Kossalbayev BD, et al. Raman Spectroscopy and Its Modifications Applied to Biological and Medical Research. Cells. 2022; 11: 386. doi: 10.3390/cells11030386

[29]Kos J, Pavelek D, Kaykhaii M, et al. Unveiling the transformative power of near-infrared spectroscopy in biomedical and pharmaceutical analysis: Trends, advancements, and applications. European Journal of Pharmaceutical Sciences. 2025; 212: 107175.

[30]Inobeme A, Natarajan A, Pradhan S, et al. Chemical Sensor Technologies for Sustainable Development: Recent Advances, Classification, and Environmental Monitoring. Advanced Sensor Research. 2024; 3(12): 2400066.

[31]Rehrl J, Celikovic S, Castillo I, et al. A systematic modeling approach for continuous flow synthesis applicable to real-time process control. Chemical Engineering Research and Design. 2025; 216: 322–332.

[32]Kourti T. Process analytical technology beyond real-time analyzers: The role of multivariate analysis. Critical Reviews in Analytical Chemistry. 2006; 36(3–4): 257–278.

[33]Ündey C, Ertunç S, Mistretta T, et al. Applied advanced process analytics in biopharmaceutical manufacturing: Challenges and prospects in real-time monitoring and control. Journal of Process Control. 2010; 20(9): 1009–1018.

[34]Svrcek WY, Mahoney DP, Young BR. A Real-Time Approach to Process Control. John Wiley & Sons; 2014.

[35]Müller D, Dercks B, Nabati E, et al. Real‐Time Optimization in the Chemical Processing Industry. Chemie Ingenieur Technik. 2017; 89(11): 1464–1470.

[36]Sen M, Singh R, Ramachandran R. A hybrid MPC–PID control system design for the continuous purification and processing of active pharmaceutical ingredients. Processes. 2014; 2(2): 392–418.

[37]Huang J, O’Connor T, Ahmed K, et al. AIChE PD2M advanced process control workshop‐moving APC forward in the pharmaceutical industry. Journal of Advanced Manufacturing and Processing. 2021; 3(1): e10071.

[38]Prakash J, Senthil R. Design of observer based nonlinear model predictive controller for a continuous stirred tank reactor. Journal of Process Control. 2008; 18(5): 504–514.

[39]Qin SJ, Badgwell TA. A survey of industrial model predictive control technology. Control Engineering Practice. 2003; 11(7): 733–764.

[40]Rawlings JB, Mayne DQ, Diehl MM. Model Predictive Control: Theory, Computation, and Design, 2nd ed. Nob Hill Pub; 2024.

[41]D’Ambrosio B, Fehling MR, Forrest S, et al. Real-time process management for materials composition in chemical manufacturing. IEEE Intelligent Systems. 1987; 2(2): 80–93.

[42]Lanzetti N, Lian YZ, Cortinovis A, et al. Recurrent neural network based MPC for process industries. In: Proceedings of the 2019 18th European Control Conference (ECC); 25–28 June 2019; Naples, Italy.

[43]Kramer A, Morgado-Dias F. Applications of artificial neural networks in process control applications: A review. In: Proceedings of the 2018 International Conference on Biomedical Engineering and Applications (ICBEA); 9–12 July 2018; Funchal, Portugal.

[44]Singh R, Sahay A, Karry KM, et al. Implementation of an advanced hybrid MPC–PID control system using PAT tools into a direct compaction continuous pharmaceutical tablet manufacturing pilot plant. International Journal of Pharmaceutics. 2014; 473(1–2): 38–54.

[45]Fischer D, Sahre K, Abdelrhim M, et al. Process monitoring of polymers by in-line ATR–IR, NIR and Raman spectroscopy and ultrasonic measurements. Comptes Rendus Chimie. 2006; 9(11–12): 1419–1424.

[46]Diehl M, Uslu I, Findeisen R, et al. Real-Time Optimization for Large Scale Processes: Nonlinear Model Predictive Control of a High Purity Distillation Column. In: Grötschel M, Krumke SO, Rambau J (editors). Online Optimization of Large Scale Systems. Springer; 2001. pp. 363–383.

[47]Santos AF, Silva FM, Lenzi MK, et al. Monitoring and control of polymerization reactors using NIR spectroscopy. Polymer-Plastics Technology and Engineering. 2005; 44(1): 1–61.

[48]Praveen M, Brogi S. Microbial fermentation in food and beverage industries: Innovations, challenges, and opportunities. Foods. 2025; 14(1): 114.

[49]Zhao S, Jiao T, Adade SYSS, et al. Digital twin for predicting and controlling food fermentation: A case study of kombucha fermentation. Journal of Food Engineering. 2025; 393: 112467.

[50]Vojinović V, Cabral J, Fonseca L. Real-time bioprocess monitoring: Part I: In situ sensors. Sensors and Actuators B: Chemical. 2006; 114(2): 1083–1091.

[51]Raamets T, Karjust K, Hermaste A, et al. Planning and acquisition of real-time production data through the virtual factory in chemical industry. In: Proceedings of the ASME International Mechanical Engineering Congress and Exposition; 1–5 November 2021; Online.

[52]Ambike A, Kim W, Kun J. Real-time operating environmentfor networked control systems. IEEE Transactions on Automation Science and Engineering. 2006; 3(3): 287–296.

[53]Bhat S. Technology for Chemical Industry Mixing and Processing. Technology. 2015; 2(2).

[54]Esmonde-White KA, Cuellar M, Lewis IR. The role of Raman spectroscopy in biopharmaceuticals from development to manufacturing. Analytical and Bioanalytical Chemistry. 2022; 414(2): 969–991.

[55]Sommerfeld S, Strube J. Challenges in biotechnology production—Generic processes and process optimization for monoclonal antibodies. Chemical Engineering and Processing: Process Intensification. 2005; 44(10): 1123–1137.

[56]Jagtap S, Rahimifard S, Duong LN. Real‐time data collection to improve energy efficiency: A case study of food manufacturer. Journal of Food Processing and Preservation. 2022; 46(8): e14338.

[57]Grassi S, Alamprese C. Advances in NIR spectroscopy applied to process analytical technology in food industries. Current Opinion in Food Science. 2018; 22: 17–21.

[58]Cen H, He Y. Theory and application of near infrared reflectance spectroscopy in determination of food quality. Trends in Food Science & Technology. 2007; 18(2): 72–83.

[59]Lavorato D, Piedepalumbo P. How smart technologies affect the decision-making and control system of food and beverage companies—A case study. Sustainability. 2023; 15(5): 4292.

[60]Singh R, Velazquez C, Sahay A, et al. Advanced Control of Continuous Pharmaceutical Tablet Manufacturing Processes. In: Ierapetritou MG, Ramachandran R (editors). Process Simulation and Data Modeling in Solid Oral Drug Development and Manufacture. Springer; 2016. pp. 191–224.

[61]Bakeev KA, Menezes JC. Future Trends for PAT for Increased Process Understanding and Growing Applications in Biomanufacturing. In: Bakeev KA (editor). Process Analytical Technology: Spectroscopic Tools and Implementation Strategies for the Chemical and Pharmaceutical Industries. John Wiley & Sons, Ltd.; 2010. pp. 521–543.

[62]Chopda VR, Gomes J, Rathore AS. Bridging the gap between PAT concepts and implementation: An integrated software platform for fermentation. Biotechnology Journal. 2016; 11(1): 164–171.

[63]Maruthamuthu MK, Rudge SR, Ardekani A, et al. Process Analytical Technologies and Data Analytics for the Manufacture of Monoclonal Antibodies. Trends in Biotechnology. 2020; 38(10): 1169–1186.

[64]Pauli V, Roggo Y, Pellegatti L, et al. Process analytical technology for continuous manufacturing tableting processing: A case study. Journal of Pharmaceutical and Biomedical Analysis. 2019; 162: 101–111.

[65]Müller DH, Flake C, Brands T, et al. Bioprocess in-line monitoring and control using Raman spectroscopy and Indirect Hard Modeling (IHM). Biotechnology and Bioengineering. 2024; 121(7): 2225–2233.

[66]Sartori F. Effective Implementation of Industry 4.0 Approaches for Process Monitoring in the Batch Manufacturing of Specialty Chemicals [PhD thesis]. Università degli studi di Padova; 2024.

[67]Claßen J, Aupert F, Reardon KF, et al. Spectroscopic sensors for in-line bioprocess monitoring in research and pharmaceutical industrial application. Analytical and Bioanalytical Chemistry. 2017; 409(3): 651–666.

[68]Rathore AS, Nikita S, Jesubalan NG. Digitization in bioprocessing: The role of soft sensors in monitoring and control of downstream processing for production of biotherapeutic products. Biosensors and Bioelectronics: X. 2022; 12: 100263.

[69]Sathiyapriyan P, Mukherjee S, Vogel T, et al. Current PAT Landscape in the Downstream Processing of Biopharmaceuticals. Analytical Science Advances. 2025; 6(1): e70013.

[70]Wilson DM, Hoyt S, Janata J, et al. Chemical sensors for portable, handheld field instruments. IEEE Sensors Journal. 2001; 1(4): 256–274.

[71]Frank R. Understanding Smart Sensors. Artech House; 2013.

[72]Xu H, Yu W, Griffith D, et al. A survey on industrial Internet of Things: A cyber-physical systems perspective. IEEE Access. 2018; 6: 78238–78259.

[73]Lea P. IoT and Edge Computing for Architects. Packt Publishing; 2020.

[74]Mowbray M, Vallerio M, Perez-Galvan C, et al. Industrial data science—A review of machine learning applications for chemical and process industries. Reaction Chemistry & Engineering. 2022; 7(7): 1471–1509.

[75]Butean A, Cutean I, Barbero R, et al. A review of artificial intelligence applications for biorefineries and bioprocessing: From data-driven processes to optimization strategies and real-time control. Processes. 2025; 13(8): 2544.

[76]Friederich J, Francis DP, Lazarova-Molnar S, et al. A framework for data-driven digital twins of smart manufacturing systems. Computers in Industry. 2022; 136: 103586.

[77]Pal PK, Hens A, Behera N, et al. Digital twins: Transforming the chemical process industry—A review. The Canadian Journal of Chemical Engineering. 2025; 103(8): 3611–3636.

[78]Harries T, Hartnoll M, Hafezianrazavi M, et al. Digital twins for predictive maintenance. Procedia CIRP. 2023; 118: 306–311.

[79]Jenck JF, Agterberg F, Droescher MJ. Products and processes for a sustainable chemical industry: A review of achievements and prospects. Green Chemistry. 2004; 6(11): 544–556.

[80]UNEP. Assessing the Environmental Impacts of Consumption and Production: Priority Products and Materials—Summary. UNEP; 2010.

[81]Rathore AS, Yu M, Yeboah S, et al. Case study and application of process analytical technology (PAT) towards bioprocessing: Use of on‐line high‐performance liquid chromatography (HPLC) for making real‐time pooling decisions for process chromatography. Biotechnology and Bioengineering. 2008; 100(2): 306–316.